Aquabot Robotic Pool Cleaner Vacuum # 1 Selling

Click here to buy!


AQUABOT


THE #1 SELLING ROBOTIC CLEANER!


Complete Pool Cleaning And Savings At The Touch Of A Button!


The computer-controlled Aquabot is pre-programmed by Aqua Products, Inc. to scrub, vacuum and filter dirt and debris from the floor, walls, waterlines and steps of all sizes, shapes and surface type of swimming pools in six hours or less — automatically. Additional Accessories Not Included: Aquabot Buggy


Features:

The lightweight Aquabot has its own pump and microfiltration bag located inside its body and operates completely independent of the main pool filter, eliminating the need for messy, bulky hoses and “costly to operate” booster pumps.
Engineered for reliable, worry free operation, the Aquabot cannot become stuck on stairs or ladders, or become tangled in hoses like other pool cleaners. Just take the Aquabot out of the box and put it in your pool – No Installation Required.
Scrubbing Action – Front and rear rotating scrubbing brushes, powered by Aquabot’s internal drive motor, loosen heavy dirt and fine particles to be vacuumed and trapped in the microfilter bag.
Vacuuming – The Aquabot’s exceptionally high suction power and large vacuum intake ports enable it to vacuum up all types of dirt and debris.
Built-in Filtration System – The Aquabot will clean and purify thousands of gallons of water per hour. The Aquabot is equipped with an expansive, reusable microfilter bag that has the capacity to hold many leaves and twigs and is capable of filtering out all types of fine particles including sand, silt, algae and bacteria. The filter bag can be easily removed and rinsed clean. And, since debris goes into your Aquabot, not your pool filter, backwashing and cleaning cartridges is reduced by up to 80% saving thousands of gallons of water, chemicals, the environment and your filter.
Better Chemical Distribution – As a result of Aquabot’s heavy-duty pumping action, the pool’s bottom and surface water are mixed, raising water temperature below while reducing evaporation above. This decreasesenergy bills and creates a more even distribution of chemicals, which normally settle to the pool floor.
No Installation – Operation is as simple as dropping the Aquabot into your pool, plugging it into its 24V transformer and pushing a button. It does the rest by itself. The Aquabot is the safest and easiest cleaner to use, and operating costs are little more than 10 cents a day.
Low maintenance – Constructed of corrosion-proof materials, with fewer than 10 moving parts, the Aquabot requires little or no maintenance.
Cut Your Summer Pool Bills In Half! The Aquabot drastically reduces the frequency of wasteful backwashing, saving thousands of gallons of water per year and reducing chemical consumption by as much as 30%. With the Aquabot at work in your pool you can even decrease the running time of your pool’s filtration system by as much as 60%.
The Aquabot, its power Supply and Floating Cable are ETL Listed to UL Standard 1081. No other robotic cleaner is this safe.


Technical Specifications Sheet

Aboveground = AGIn Ground = IG

IG

Designed For:

All Surface Types Most Shapes Floors, Walls, Some Stairs (Including 90° angles)

Pool Size(maximum size):

Up to 40′ Any Configuration

Remote Control:

None

Cleaning Time (most pools):

3-4 Hours

Warranty:

1 Year

Timer Auto Shut-Off:

None / External Timer System Capable

Debris Intake Ports:

2 Offset; clogless operation 1.2″ x 4.7″ each

Suction Port Depths:

Standard

Port Velocity Adjustments:

None

Filtration Particulate Size(microns):

Down to 2 Microns

Filter Max DebrisHolding Capacity

23 Quarts

Forward / Reverse Timer:

N/A

Raised Surface Obstacle Avoidance:

None

Cable Length / Diameter:

51′ Long 1/2″ Diameter Thermoplastic Rubber

Drive Motor:

High Performance; Brushless / Individually Sealed

Drive Feature:

Indirect Motor – Belt

Drive Tracks:

Standard

Guidance Mechanism:

Directional Guidance Handle

Handle Locking Positions (waterline movements)

2 Diagonal (Left / Right)

Wheels:

N/A

Cleaning Sq. Ft. Per Hour:

3500

Pump Motor:

High Performance; Brushless / Individually Sealed

Filtration / Circulation Rate: Gallons Per Hour:

4000

Cleaner Weight:

16.9 lbs.

Operating Voltage:

Brushing Mechanism:

Dual Foot-Long Rotating Bristle Flap

Hydro Scrubbing Mechanism:

None

Power Supply:

Energy Efficient Water Resistant

ETL listed to UL Standards:

Yes: Entire Product Cleaner, Cord, Power Supply

Wattage:

180

Operating Cost:

<5¢ / Cleaning

Elec. Requirments:

110v / 60Hz

Cleaner Dimensions:

Packaging Dimensions:

L: 16 13/16″ x W: 16 3/4″ x H: 17″

Shipping Weight:

34 lbs.


 



Additional Photos




Printable PDF Brochure


Get the information you want now. Download the product information brochures via PDF. This requires Adobe Acrobat Reader® software. If you wish to have a brochure mailed to you click here.



Click here to download


Powered by eBay Turbo Lister

On Apr-15-06 at 07:09:37 PDT, seller added the following information:

On Mar-23-07 at 09:44:32 PDT, seller added the following information:


POOL ROBOTIC POOL CLEANERS VS. WATER-POWERED CLEANERS

Robotic Pool Cleaners Outperform Water-Powered Cleaners

Robotic Pool Cleaners

Water-Powered Cleaners

Hose assembly Required? Computerized Cleaning Coverage? Independent Pump and Filter System? Extends Life of Pool Filter and Pump? Drastically Reduces Electricity Use? Drastically Reduces Backwashing?

No Yes Yes Yes Yes Yes

Yes No No Reduces Life of both Increases Electricity Use Increases Backwashing

On Oct-08-09 at 22:46:33 PDT, seller added the following information: